Carlton Chipper
2518
Powerful & Portable. Reliability that trimming crews can count everyday.
The J.P. Carlton 2518 is designed and built to stand up in the toughest applications, able to withstand all the punishment you and your crew can dish out.
Carlton 2518 Wood Chipper
The 2821 features a massive 30-inch by 20-inch opening combined with a 40-inch diameter pocketed drum, allowing it to easily consume the largest trees. Aggressive feeding is handled by a dual pump hydraulic system controlled by a digital reversing autofeed system. The J.P. Carlton 2821 series uses an exclusive long pivot arm for the 15¾” diameter top feed wheel. This long arm pivot gives the top feed wheel a smooth vertical lift path, allowing for easy opening over the largest butt ends. The 2821 series also incorporates an exclusive Air Vortex Control to channel and accelerate discharge air, giving the 2821 series high discharge velocities and great chip throwing power.
Cutting Style
Drum
Drum Size
18"
Infeed
64"
Engine
140 HP John Deere T4F Turbo Charged Diesel
Oversized 37″ Diameter Chipping Drum
Cuts down and forward - Cutting with the grain minimizes the horsepower required, while giving the smoothest chipping action and best discharge possible.
Three Feed Motors
Three Feed Motors working on independent circuits provide extreme pulling power.
64″ Wide Infeed
Chute takes the big tops and requires less trimming by the crew.
Tandem Hydraulic System
Provides hydraulic fluid independently to each feed wheel. This system ensures the most power at all times to the feed system.
Optional Hydraulic Winch
Optional Hydraulic Winch gets the big material to the chipper.
Swivel Discharge
Quickly and easily allows the operator to fill the largest capacity chip trucks corner to corner, or direct the chips to a precise place on the lot.
25″ x 18″ Throat Opening
Massive 25″ x 18″ Throat Opening is the largest in its class and easily handles the largest tops.
Specs
Model Specifications
The specs tell the story. Chipping capacity, feed system, and drum power are what let Carlton chippers turn a pile of brush into clean mulch without slowing your crew down.
11,300 lbs
Weight
20' 4"
Length
9' 10"
Height
7' 7"
Width
25" x18"
Throat Opening
64" x 35"
Infeed Hopper Opening
37"
Chipper Drum Diameter
46 cubic inch displacement
Feed Motor Top
32 cubic inch displacement
Feed Motor Bottom
100' per minute
Feed Rate
Top: 15 3/4" | Bottom: 10 1/2"
Feed Roller Diameter
360º Manual Swivel (Hydraulic optional)
Discharge Chute
Image Description
Image Description
Image Description
Image Description
Image Description
Image Description
Models
Other models in the same series
Get in touch
Take on jobs your competition walks away from
Connect with our team to find the right lift for yours.
